Imagine that you live in Toronto. It’s an average Tuesday evening. And, as usual, you just started a new load of laundry. In the middle of spinning your washer, you hear a grunting sound. And then… nothing. As quiet as a scream. The frustration of a broken washer is unmatched. Before you curse the gods of appliances, do not worry. There is still hope. If your washing machine is acting up, find more help here.
First of all, diagnosing a problem could help you save a lot of cash. Sometimes, the problem is as easy to fix as a squirrel caught on a wire. A spinning problem? Lid switch is the likely culprit. This tricky device is usually the culprit. This means that if your machine doesn’t turn on, it is likely to be the culprit.
A water problem can also cause you a great deal of grief. In the event that your drum does not fill, it is possible that you have a blocked inlet. If the drum isn’t filling up, your inlet hose might be blocked. You should clean the blockage if your hose is as clogged up as Don Valley Parkway rush-hour traffic. Still no dice? You could have a Grinch in your inlet-valve stealing you wash cycle.
Imagine now that your motor no longer hums. It’s worth a try to reset it before you start tearing into it. Sometimes unplugging the power, waiting for 30 seconds then plugging it in again works. The same as rebooting a grumpy older computer. It’s possible that you will need professional help if this does not solve the problem. As tricky as a kitten on a heated tin roofing, motors are not for the faint-hearted.
Each now and again, washing machine decides to go for a stroll–literally. When a washing machine starts to dance, this means the machine is out of balance. This is a simple trick. Make sure (oops! I mean make certain) that the four feet of your machine are all flat on ground. They can be adjusted as required. Pour a more even load, throw in some towels. Voila, your washer will no longer be a wanderer!
Now some people say vinegar can remove dirt and gunk effortlessly. You can use it for window cleaning and salad dressings but you need to be careful. Overuse can damage plastic components. A washing machine cleanser can be used occasionally instead. Like giving your washer an afternoon at the spa.
Your laundry is emitting a burnt smell. It’s time to raise the alarm. It’s time to unplug your device faster than a person would take their hand off a burning stove. There could be a problem with your internal electric system. The best thing to do is call an electrician.
Don’t forget to mention leaks. Like traitors from the inside, leaks are like saboteurs. When you notice water pooling in the area around the foundation, inspect the seal. You may find that they are brittle or have worn down. Check it out and replace it if you find it stiffer than an iced noodle. The hoses should also be as tight as a cockroach in a carpet.
Toronto is not only the home of Drake and NHL, but also some highly-skilled appliance whisperers. There are many local experts who can bring your washer to life. Be sure to check online reviews and seek recommendations. You can benefit from the advice of a trusted friend.
Online video tutorials are great for DIY enthusiasts. They can show you how to fix common problems. Be careful not to overdo it. They can be as complicated as washing machines and stubborn.
The value of regular maintenance cannot be overstated. The washer should be kept at least 3 inches away from the wall in order to avoid hose kinks. Keep the doors ajar and wipe off door seals after you wash them to help prevent mold. Don’t overload your machine.
The next time that your washer decides it wants to take a strike, don’t forget these tips. With a bit more elbow grease and patience, you can keep your budget and avoid the headaches that come with laundry. In the end, if you can’t do it yourself, hiring a pro may be the way to go. Toronto, have a happy wash!